GLsun Science and Tech Co., Ltd Company Logo GLsun Science and Tech Co., Ltd
5 1

High Power Optical Amplifier

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

GLsun Science and Tech Co., Ltd
[China]

Address
Guanglong S&T Zone, No.8 high-tech Industry Park Chaoyang Road, Guilin ,541004 Guangxi, China Guilin Guangxizhuangzuzizhiqu
Phone
86-0773-3116006
Contact name
guanglongguangdian

Quick Information

  • Brand Name: GLSUN
  • Place of Origin: China
  • Model Number : EDFA

Description

INTRODUCTION:
I. Features 

1. The EDFA is a fiber amplifier and power supply integrated in a 1RU&2RU shelf.
Multiple output ports can be chose.
2. The OLAH incorporates electrical control circuitry wit a digital signal 
processor and includes photodiodes for monitoring the optical input and 
output power through tap couplers. 
3. Double cooling system can protect the pump laser to work in a long time.
4. RJ45 and RS 232 port, SNMP management system.
5. Good stability, VFD displays the working conditions, good trouble alarm system.

Ⅱ. Technical Parameters
Model -20-27 -28 -29 -30 -31 -32 -33 -34 -35 -36~38
Output Power           (dBm) 20-27 28 29 30 31 32 33 34 35 36~38
CATV Input power      (dBm) -3~10
CATV Wavelength Range  (nm) 1530~1565
Output port  8、16、32、64
Output power stability    (dB) <±0.2
C/N (dB) ≥45
CSO (dB) ≥63
CTB (dB) ≥63
Bias oscillation sensitivity  (dB) <0.2
Bias oscillation dispersion (PS) <0.5
Optical return loss       (dB) ≥45
CATV Fiber connector FC/APC、SC/APC
Noise ratio             (dB) <5.0(0dBm optical input)
connector RJ45(SNMP) 、RS232 
Power loss             (W) ≤130
Working Voltage         (V) 220V(90~265)、DC-48V
Working Temp          (℃) -20~85
size                  (mm) 540(L)×486(W)×88(H)

 Ⅲ. Panel display

32/64/128 way output

16/32 way output


 8 way output



 Ⅳ. Important Notes
1. Please avoid eyes directly to output.
2. Please turn off the power first then plug in or out the patch cord
3. EDFA has very small influence on CSO and CTB, but has big influence in C/N.
The input optical power influence the C/N. High optical input gets higher C/N.
Please see the following data. The minimum optical input should be 4dBm. 

C/N and Optical Input
Optical In(dBm) 7 6 5 4 3 2 1 0 -1 -2 -3
C/N(dBm) 52.4 52.2 52.0 51.6 51.1 50.6 50.1 49.5 48.8 48.1 47.3

Ⅴ Normal Trouble Solution
   The display in screen of the EDFA shows the correct output of the pump laser, if the 
output is lower than showed, please check as the following steps.
1. Check the optical meter. Because of the high out of EDFA, please don’t use Chinese 
optical meter to test the EDFA, the advised one is EXFO.
2. The output adaptor burnt. 
3. The operator plug in and out the patch cord when the power on, this will burnt the
  output pigtail connector and make the output lower. The solution is to splice a new
  the pigtail connector.
4. Some operators use the bad quality patch cord and its fiber core is too long, after
  connected, it will hurts the pigtail of pump laser output. In this condition, in the
  first test, the output is correct, but in the second time, the output become lower. 
  The solution is also to splice a new pigtail connector.
5. The wavelength of the input deviates far from 1550nm, it will make both the 
  outputport and screen show lower.
6. Too low input will make both the output and screen show lower.

 Ⅵ. Precautions:
1. Before installation or operation of unit, please carefully go through the user’s 
manual.
2. OLAH Series EDFA should be serviced only by qualified personnel.
3. Before proceeding with installation and/or operation of transmitter, please assure 
that transmitter is well earthed.
4. OLAH series EDFA are Class III laser products. Use of controls, adjustments, and 
procedures other than those specified herein may result in hazardous laser radiation 
exposure.

Ⅶ. Warranty Term
OLAH Series EDFA are covered by Two YEARs Limited Warranty, which starts from the initia
l date of your purchase. We provide its customer whole-lifetechnical supports.If 
warranty is expired, repair service only chargesparts (if required). In the event hat a 
unit must be returned for service, before returning the unit, please be advised that:
1. Warranty mark pasted on the housing of unit must be in good conditions.
2. A clear and readable material describes model number, serial number and troubles 
should be offered.
3. Please pack the unit in its original container. If the original container is no 
longer available, please pack the unit in at least 3 inches of shock absorbing material.
4. Returned unit(s) must be prepaid and insured. COD and freight collect can not be 
acceptable.
NOTE: we do not assume responsibility for damage caused by improper packing of returned 
unit(s).
The following situation is not covered by warranty:
1. The unit fails to perform because of operators’ faults.
2. Warranty mark is modified, damaged and/or removed.
3. Damage caused by Force Majeure.
4. The unit has been unauthorized alteration and/or repaired.
5. Other troubles caused by operators’ faults.


Price

  • Price Condition : FOB
  • Price : USD0 / piece
  • Delivery Port : Guilin

Packaging & Delivery

  • Packing :1 piece per box
  • Delivery Lead Time : 7 days for ready goods
  • Minimum Order : 1 piece
  • Supply Ability : 30000 pcs/month

Product Image

  • High Power Optical Amplifier image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To guanglongguangdian
GLsun Science and Tech Co., Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Telecommunications Products
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.